Home CardSharing Prices Instructions Re-Sellers Conditions Contact Us TEST LINE
Sat-Share.TV
Deal Only With The Best CardSharing CCcam Server

Openbox S9 HD


1. Download the latest firmware upgrade.

2. If you already have an active CCcam c-lines

- Your line will looks like this: C: (IP ADRESS)

(PORT) (USERNAME) (PASSWORD)

3. Then copy/backup into CCcam.cfg file.

Otherwise ask us to sent you ready CCcam.cfg

file that will include your subscription  c-lines.

4. Copy the 2 files (firmware/CCcam.cfg) that

you have to a USB Flash Drive (USB Flash

Drive have to be "FAT Format" and files have to

be at the Start of drive i.e E: and NOT at any

"Folder").

5. Plug the USB Flash Drive into the back of the

receiver.

6. Setup your Openbox as normal, e.g. sat cable,

hdmi or scart cable ,lan, power cable, etc. and

turn it on.

7. On the "Remote control" Press "Menu", scroll

down to "Tools"  > "Upgrade by USB"  (select

the firmware .abs file that's on your USB Drive)

> "Start"

8. It will then ask you if you wish to "Burn the

Flash" , press "OK" = Yes

9. The new firmware will now be installed on the

box and takes a few mins to complete.

10. (P.S. Please DON'T follow steps 6. & 7. if

your Openbox is already updated with Firmware

supports CCcam Emulator)

11. After receiver reboots ,press "Menu" >

"Network Setup" > "Network Setup" and turn

"DHCP ON" and Apply.

12. Then back to the Menu Screen and "Network

Setup" and press > "CCcam client setup" >

"Update Files by USB".

13. Select the "CCcam.cfg" and then press

"Read" > then Reboot.

14. Then back to Menu Screen and "Network

Setup" > "CCcam client Setup"  > "Manage

Config Files" > "CCcam.cfg",and Activate all

your c-lines (you have to highlight each one

and Activate).

15. Reboot the box and remove the USB

Flash Drive.


Spiderbox 9000HD


Example:

C: server.net 699 argentina server.up4

server.net      (IP ADDRESS)

699     (PORT)

argentina      (USERNAME)

server.up4     (PASSWORD)


1. Press "Menu"

2. Highlight USB

3. Scroll down to "Network"

4. "OK" at 1st one,  "Type-on"

5. Down to "1st server setup" press "OK",

"Server 01", "OK", L-R to "CCcam"

6. Down to "IP" address, "OK", put in the

IP ADDRESS.  To save press "Menu"-

"Save"

7. Down to "PORT" address, "OK", put in

the PORT NUMBER . To save press

"Menu"-"Save"

8. Down to "USERNAME", "OK", put in

the USERNAME.   To save press "Menu"

-"Save"

9. Down to "PASSWORD", "OK", put in

the PASSWORD.   To save press "Menu"-

"Save"

10. Down to Press "APPLY", "OK" ---

"DONE"

11. Do the same this other servers Exit

all menus.


Starview Combo HD


The Starview Combo HD has the tendency

to create "freezing" by itself. We recomment

to update to the latest firmware which may

make it a bit more stable.


- To prepare the receiver for C@rdSharing  

please follow the    instructions below:

- Press menu / accessory /network.

- If you don't see server press 8989.

- Server -server setup , press ok.

- You should have

1 off

2 off

3off     Up to     8 off


- Press ok on 1 off

- Change type to cccam.

- Name or IP address = First part of code.

- Port = part 2 of code (5digits)

- ID = third part of code

- Password = final part of code

- Deskey leave blank. You will probably need

to change Type cccam to newcamd delete

deskey and change back Type to cccam.

- Press apply.

- Exit out of everything and should be ok.

- On name or IP address do not enter C: just

enter what follows after.

- To check status

- Menu/accessory/network/server

- You will have on number 01 cccam ******

****connect


If its wrong the same as above but with disconnect


Installing a C-Line in a Dreambox


A.  Once you open it, it should look like the photo below.

     Choose the language of your choice. Login is usually Name: root and Password: dreambox

1.  This is the IP of your Router. It should come up by itself.

2.  This is your Dreambox ( Receiver) IP address. If you don’t know it, press the “Search” button in order to scan and find the IP.      Once you enter the IP address, press “Reconnect”.

3 & 4.  These two should be green in order to be able to go further. If one of them is red, then it means that you have either entered             the wrong receiver IP address or your receiver is locked.

B.  Once all are green, press “FTP” to move further.


A.Once you open it, it should look like the photo below.

Choose the language of your choice. Login is usually Name: root and Passw: dreambox

1.This is the IP of your Router. It should come up by itself.

2.This is your Dreambox ( Receiver) IP address. If you don’t know it, press the “Search” button in order to scan and find the IP. Once you enter the IP address, press “Reconnect”.

3 & 4. These two should be green in order to be able to go further. If one of them is red, then it means that you have either entered the wrong receiver IP address or your receiver is locked.

B.Once all are green, press “FTP” to move further.
















D.The next page should look like the photo below. If the left column doesn’t show anything, this means that your receiver has been locked by the person who has entered the previous C-lines in. You can either get those codes or Flash your receiver. If it looks like the photo below, double click on “var”.
















E.It should now look like the photo below. Double click on “etc”.















F.If you have installed a CCcam in your receiver, then it should look like the photo below. Find the file “CCcam.cfg”, right click on it and select “edit”.















G.You should come to the page below. Please delete EVERYTHING from within this file. There should be absolutely nothing in it. Copy and Paste the C-line(s) we have provided for you. Press the icon shown by the red arrow in order to save. A confirmation window will come up to ask you to confirm. Press yes and now you are finished. You may need to restart your receiver in order for the C-line(s) to take effect.



Cardsharing
D. The next page should look like the photo below. If the left column doesn’t show anything, this means that your receiver
has been locked by the person who has entered the previous C-lines in. You can either get those codes or Flash your receiver.
If it looks like the photo below, double click on “var”. You can skip this step if you have Enigma 2 installed.
cardsharing server
E. It should now look like the photo below. Double click on “etc”.
CCcam Server
F. If you have installed a CCcam in your receiver, then it should look like the photo below. Find the file “CCcam.cfg”,
right click on it and select “edit”.
cardsharing cccam server
G. You should come to the page below. Please delete EVERYTHING from within this file. There should be absolutely
     nothing in it. Copy and Paste the C-line(s) we have provided for you. Press the icon shown by the red arrow in order
     to save. A confirmation window will come up to ask you to confirm. Press yes and now you are finished. You may
     need to restart your receiver in order for the C-line(s) to take effect.
dreambox cardsharing You can download the DCC295

HERE

For more Instructions try

Youtube

For Images and Emulators, try

HERE

HERE

HERE